Trimming saw PRECISIOCS 50 EBG

    Item number 574765
    Select variant
    To the variant comparison

    Items included and different models

    • This machine

      Trimming saw CS 50 EBG
      Items included

      accessories holder1x

      angle stop1x

      circular saw blade WOOD UNIVERSAL HW 190 x 2, 6 FF W321x

      dust extraction set1x

      extension table1x

      foldaway legs1x

      hex key, WAF 61x

      ripping-cut fence1x

      Sliding table1x

      3xsplinterguard

      support with transport roller1x

      workpiece holder1x

      Qty. in pack

      1.00 Pieces

    • Comparable product

      Trimming saw CS 50 EBG-FLR
      Items included

      accessories holder1x

      angle stop1x

      circular saw blade WOOD UNIVERSAL HW 190 x 2, 6 FF W321x

      dust extraction set1x

      extension table1x

      foldaway legs1x

      hex key, WAF 61x

      ripping-cut fence1x

      Sliding table1x

      3xsplinterguard

      support with transport roller1x

      workpiece holder1x

      Qty. in pack

      1.00 Pieces

      Show details

    • Comparable product

      Trimming saw CS 50 EBG-Set
      Items included

      accessories holder1x

      angle stop1x

      circular saw blade WOOD UNIVERSAL HW 190 x 2, 6 FF W321x

      dust extraction set1x

      extension table1x

      foldaway legs1x

      hex key, WAF 61x

      ripping-cut fence1x

      Sliding table1x

      3xsplinterguard

      support with transport roller1x

      workpiece holder1x

      Qty. in pack

      1.00 Pieces

      Show details
    Show details
    Close

    Functions

    Full power perfectly under control.

    The PRECISIO CS 50 is the ideal solution for cross and rip cuts in applications involving interior fitting, furniture assembly and exhibition stand construction. Thanks to its low weight and a host of ingenious functions, the CS 50 is ideal for applications where the nature of the work constantly changes, e.g. assembly tasks.

    • Tool-less FastFix saw blade changes
    • Multifunction handle: one handle with all functions integrated
    • Change quickly from rip to cross cuts with the angle stop
    • Moving splinterguard for splinter-free cuts on both sides
    • Surrounding V groove for locating angle stops
    • Can be upgraded to a sawing station by adding an extensive range of accessories
    • Saw blade holder (accessory): saw blades and splinterguard always within easy reach

    Product highlights

    • Achieve ideal results more quickly:

      Quick conversion from rip cuts to cross cuts with the angle stop. And FastFix saw blades for sawing that is always adapted to the material.

    • Convenient and safe:

      All functions are safe in your hands on the handle: On/off switch, speed adjustment, quick start/stop functions and guiding mechanism.

    • Systems get it done:

      Attachment system for even wider, longer and larger work. Extraction option for a dust-free, healthy working environment.

    Product details

    CS 50 EBG

    • Splinter-free cuts on both sides

      The integrated splinter guard guarantees high-quality results, with splinter-free cuts on both sides.

    • Changing saw blades without using tools

      The FastFix saw blade replacement enables the work to be adapted to the material. The right blade can be set up in an instant.

    • One handle for all functions

      On/off switch, speed adjustment, quick start/stop functions and guiding mechanism – all of the most important control elements are integrated and clearly arranged in the multifunctional handle.

    • Tools always to hand

      There is sufficient space in the saw blade holder (available as an accessory) for up to four saw blades, a splinter guard and pencil – dust-protected and within reach at all times.

    • Easy to transport

      Low weight and integrated foldaway legs: The CS 50 is easy to transport and set up in seconds. Changing the working height is easy.

    • Always work at the right angle

      Adjusting the cutting angle for angled cuts between -2° and 47° on the CS 50 is quick and easy thanks to the convenient control elements.

    • 长时间cross cuts

      The CS 50 has a cutting path of 304 mm, allowing you to make cross cuts of up to 200 mm, even at an angle of 45°.

    • Fast changeover from cross to rip cuts

      The angle stop can be rotated by 180° and can be used easily on either side. The CS 50 can therefore be changed from the cross-cut to the rip-cut position in no time at all.

    • Can be expanded

      The PRECISIO can be converted into a fully fledged sawing station with minimal effort by adding an extension table, table lengthener and sliding table.

    • The holder for accessories

      Push stick, guard and preset profile setting rail can be securely stowed in the accessory holder directly on the saw to save space. This means that the system accessories are neatly stowed and always to hand.

    • Simply mobile. Simply stable

      The integrated transport rollers enable the machine to be moved easily. The tilt protection with collapsible support lends the saw additional stability.

    • Splinter-free cuts on both sides

      The integrated splinter guard guarantees high-quality results, with splinter-free cuts on both sides.

    • Changing saw blades without using tools

      The FastFix saw blade replacement enables the work to be adapted to the material. The right blade can be set up in an instant.

    • One handle for all functions

      On/off switch, speed adjustment, quick start/stop functions and guiding mechanism – all of the most important control elements are integrated and clearly arranged in the multifunctional handle.

    • Tools always to hand

      There is sufficient space in the saw blade holder (available as an accessory) for up to four saw blades, a splinter guard and pencil – dust-protected and within reach at all times.

    • Easy to transport

      Low weight and integrated foldaway legs: The CS 50 is easy to transport and set up in seconds. Changing the working height is easy.

    • Always work at the right angle

      Adjusting the cutting angle for angled cuts between -2° and 47° on the CS 50 is quick and easy thanks to the convenient control elements.

    • 长时间cross cuts

      The CS 50 has a cutting path of 304 mm, allowing you to make cross cuts of up to 200 mm, even at an angle of 45°.

    • Fast changeover from cross to rip cuts

      The angle stop can be rotated by 180° and can be used easily on either side. The CS 50 can therefore be changed from the cross-cut to the rip-cut position in no time at all.

    • Can be expanded

      The PRECISIO can be converted into a fully fledged sawing station with minimal effort by adding an extension table, table lengthener and sliding table.

    • The holder for accessories

      Push stick, guard and preset profile setting rail can be securely stowed in the accessory holder directly on the saw to save space. This means that the system accessories are neatly stowed and always to hand.

    • Simply mobile. Simply stable

      The integrated transport rollers enable the machine to be moved easily. The tilt protection with collapsible support lends the saw additional stability.

    Usage

    Main applications

    • Draw the saw blade for quick, precise cross cuts up to 300 mm wide
    • Cross cuts up to 200 mm wide at 45°
    • Rip cuts up to a depth of 52 mm
    • Tilting saw blade for angled cuts between -2° and 47°
    • Retractable spacer wedge for hidden cuts - removal not necessary

    Technical Data

    
    Technical data
    Power consumption
    1 200 W
    Idle engine speed
    1 600 – 4 200 min⁻¹
    Saw blade diameter
    190.00 mm
    Cutting height 90°/45°
    0 - 52/0 - 37 mm
    Inclination
    0 (-2)° - 45 (+47) °
    Cutting path
    304.00 mm
    Table dimensions
    585 x 400 mm
    Table height, legs folded away
    333.00 mm
    Table height, legs unfolded
    900.00 mm
    Dust extraction connection diameter
    27/36 mm
    Cable length
    4.00 m
    Cutting height
    52 mm
    Product weight without accessories
    23.00 kg
    Transport weight incl. accessories
    29.60 kg
    Drive type
    Mains
    Performance features

    • MMC digital electronics

      Processor controlled “Multi Material Control” power electronics provide adjustable and constant speeds as well as temperature monitoring for work on all types of material.

    • Splinter guard

      Patented splinterguard for splinter-free cuts on both sides when sawing.

    • FastFix

      Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.

    • CLEANTEC

      Standard connection (27/36/50 mm) for dust extraction, protects the operator and the environment.

    • Quick-acting brake

      For safe work when planing, sawing and routing.

    • Groove in saw table

      lever clamps on the saw table fix the workpiece securely and prevent it from shifting accidentally

    Noise and vibration values
    Idle state: A-weighted sound power level, LWA
    97.00 dB(A)
    Idle state: Standards series EN
    61029-2-1
    Idle state: Uncertainty (vibration) K
    1.50 m/s²
    Idle state: A-weighted sound pressure level, LpA
    84.00 dB(A)
    Idle state: Total vibration average, Ah
    2.50 m/s²
    Idle state: Uncertainty (noise) K
    3.00 dB
    Sawing: Total vibration average, Ah
    2.50 m/s²
    Sawing: Standards series EN
    61029-2-1
    Sawing: Uncertainty (noise) K
    3.00 dB
    Sawing: A-weighted sound power level, LWA
    103.00 dB(A)
    Sawing: A-weighted sound pressure level, LpA
    90.00 dB(A)
    Sawing: Uncertainty (vibration) K
    1.50 m/s²

    Downloads

    Op. Instruct.
    (PDF | 7MB)
    Safety instruction
    (PDF | 532KB)

    Accessories

    You can view 8 of 17 possible accessory items here.You can view 4 of 17 possible accessory items here.

    Show all
    Show all

    Additional versions

    You might be also interested in this