Cordless drillC 18-Basic

Item number 576434

Items included and different models

{0} of {1} displayed

C 18-Basic

C 18 HPC 4,0 I-Plus

C 18 HPC 4,0 I-Set

This machine

Cordless drill C 18-Basic

Items included

BP 18 Li 4.0 HPC-ASI battery pack1x

rapid charger TCL 61x

belt clip1x

bit PZ 21x

BKS SYS3 D5 PZ TX 100 CE bit cassette1x

CENTROTEC BH 60 CE Imp magnetic bit holder1x

CENTROTEC tool chuck1x

FastFix angle attachment1x

FastFix eccentric attachment1x

FastFix keyless chuck 13 mm KC 13-1/2-K-FFP1x

Systainer SYS3 DF M 1871x

Systainer SYS3 M 1871x

Qty. in pack

1.00 Pieces
Comparable product

Cordless drill C 18 HPC 4,0 I-Plus

Items included

2xBP 18 Li 4.0 HPC-ASI battery pack

rapid charger TCL 61x

belt clip1x

bit PZ 21x

BKS SYS3 D5 PZ TX 100 CE bit cassette1x

CENTROTEC BH 60 CE Imp magnetic bit holder1x

CENTROTEC tool chuck1x

FastFix angle attachment1x

FastFix eccentric attachment1x

FastFix keyless chuck 13 mm KC 13-1/2-K-FFP1x

Systainer SYS3 DF M 1871x

Systainer SYS3 M 1871x

Qty. in pack

1.00 Pieces

Show details
Comparable product

Cordless drill C 18 HPC 4,0 I-Set

Items included

2xBP 18 Li 4.0 HPC-ASI battery pack

rapid charger TCL 61x

belt clip1x

bit PZ 21x

BKS SYS3 D5 PZ TX 100 CE bit cassette1x

CENTROTEC BH 60 CE Imp magnetic bit holder1x

CENTROTEC tool chuck1x

FastFix angle attachment1x

FastFix eccentric attachment1x

FastFix keyless chuck 13 mm KC 13-1/2-K-FFP1x

Systainer SYS3 DF M 1871x

Systainer SYS3 M 1871x

Qty. in pack

1.00 Pieces

Show details

Show details

Close

Functions

Unique shape. Interchangeable head.

Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment, CENTROTEC quick-change system, as well as angle attachment, eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the C 18 cordless drill is light, long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work. Available in unique C-design or – depending on personal preference – in T-design as the T 18+3.

Switchover from screwdriving to drilling without changing the set torque
Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop
FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools
Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor
The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
Noticeably lighter at full power thanks to Li-HighPower battery pack with high current resistant battery cells
理想结合Li-HighPower电池pack: Weighing not even 600 grams, it is both 20% lighter and 50% more compact than a 5.0 Ah standard battery pack
Fully electronic torque setting and switch-off for precise screwdriving
The impressive ergonomics of the unique C-shape design: Compact, lightweight and perfectly balanced
The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop

Product highlights

Easy to change as often as you like.

The CENTROTEC quick change system, angle attachment, eccentric attachment and depth stop mean that you can step up the pace when drilling and screwdriving. The practical switch save function remembers the torque you have set, even when changing between drilling and screwdriving.
独特的在外面。聪明的在里面。

Sits perfectly in the hand thanks to compact ergonomic C-design. Ideal in combination with the Li-HighPower Compact battery: it saves weight without reducing performance. For even longer lasting performance per battery charge, the maintenance free brushless EC-TEC motor only takes the exact amount of power that the application demands.
Guaranteed reliability.

The cordless screwdriver and battery pack are of course completely covered with the comprehensive services of Festool SERVICE.

Product details

C 18-Basic

Intelligent motor management

The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
Durable and extremely light

The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.
Precise work

With the handle positioned on the drilling and screwing axis, the handy and perfectly balanced C-design enables it to be positioned extremely accurately.
Extra mobile with vehicle integration

The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

Ideal for tight spaces

As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the C 18.
Six bits always to hand

The practical bit holder provides space for up to six bits – magnetically secured against falling out.
In the smallest of spaces

The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.
Living on the edge

Every screw can be reached with the eccentric adapter.
CENTROTEC quick-change system

Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
Chuck for standard tools

The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.
Optimum power performance

Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
Optimal lighting

The integrated LED light permits precise work even in dark corners.

Intelligent motor management

The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

Durable and extremely light

The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.
Precise work

With the handle positioned on the drilling and screwing axis, the handy and perfectly balanced C-design enables it to be positioned extremely accurately.
Extra mobile with vehicle integration

The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.
Ideal for tight spaces

As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the C 18.
Six bits always to hand

The practical bit holder provides space for up to six bits – magnetically secured against falling out.
In the smallest of spaces

The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.
Living on the edge

Every screw can be reached with the eccentric adapter.
CENTROTEC quick-change system

Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
Chuck for standard tools

The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.
Optimum power performance

Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
Optimal lighting

The integrated LED light permits precise work even in dark corners.

Usage

Main applications

Furniture assembly and kitchen fitting
Installation of fittings, rear walls, strips
Installation of doors and windows, and drilling and screwdriving in wood, metal and plastic
Fences, pergolas, carports, canopies
Production of wooden substructures

Technical Data

Technical data

Battery voltage

18 V

Gears

2

Idling speed, 1st gear/2nd gear

0 - 450/0 - 1500 min⁻¹

Drilling diameter, wood/steel

40/13 mm

Torque adjustment 1st/2nd gear

0.8 - 8/0.5 - 6 Nm

Max. torque, wood/steel

27/45 Nm

Chuck range

1.5 - 13 mm

Product weight

1.00 kg

Drive type

Battery

Performance features

Electronic

Speed control for adjusting to all types of materials.
FastFix

Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Torque shut-off

Intelligent technology ensures the optimum screwdriving force for every material.
EC-TEC motor

The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.

Noise and vibration values

Drilling in metal: Total vibration average, Ah

3.60 m/s²

Drilling in metal: Standards series EN

62841

Drilling in metal: Uncertainty (noise) K

5.00 dB

Drilling in metal: Uncertainty (vibration) K

1.50 m/s²

Drilling in metal: A-weighted sound pressure level, LpA

65.00 dB(A)

Drilling in metal: A-weighted sound power level, LWA

76.00 dB(A)

Fastening: Total vibration average, Ah

2.50 m/s²

Fastening: Standards series EN

62841

Fastening: Uncertainty (noise) K

3.00 dB

Fastening: Uncertainty (vibration) K

1.50 m/s²

Fastening: A-weighted sound pressure level, LpA

64.00 dB(A)

Fastening: A-weighted sound power level, LWA

75.00 dB(A)

Downloads

Declaration of conformity

(PDF | 50KB)

Label

(PDF | 95KB)

Accessories

You can view 8 of 119 possible accessory items here.You can view 4 of 119 possible accessory items here.

HighPower battery pack BP 18 Li 4,0 HPC-ASI

for all 18-volt devices (except ETSC 125, RTSC 400, DTSC 400)
Rapid charger TCL 6

for all Li-ion battery packs (except for BP-XS battery pack for CXS/TXS)
Keyless chuck KC 13-1/2-K-FFP

for all Festool cordless drills, cordless percussion drills, drills (except DR 20/DRP 20) and percussion drills with CENTROTEC interface
Tool chuck WH-CE CENTROTEC

for all Festool cordless drills, cordless impact drills, drills (except DR 20/DRP 20) and impact drills with CENTROTEC interface
Bits PZ 1-50 CENTRO/2

for Festool cordless drills and cordless impact drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)
Bits PZ 2-50 CENTRO/2

for Festool cordless drills and cordless impact drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)
Bits PZ 3-50 CENTRO/2

for Festool cordless drills and cordless impact drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)
Bits PH 1-50 CENTRO/2

for Festool cordless drills and cordless impact drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)